Microsoft Windows Server 2003 Inside Out Chapter 13
Microsoft Windows Server 2003 Inside Out Chapter 13 Figure 13-10. Use System Information to check for resource conflicts. You can try to resolve resource conflicts in several different ways. Some devices use jumpers to manage resource settings, and in this case, the operating system cannot control the resource settings. To make changes, you must shut down the computer, remove the device, change the jumper settings, and then replace the device. In some cases, the jumpers are managed through software rather than an actual jumper switch. Here, you would use the device setup or configuration utility to change the resource settings. For PCI devices, you can try swapping the cards between PCI slots. This will help if the IRQ or other resource settings are assigned on a per-slot basis, as is the case with some motherboards. You might be able to check the motherboard documentation to see which IRQ interrupts are assigned to which slots. In any case, you ll need to experiment to see which card configuration works. For PCI devices, a conflict could also be caused by the device driver and the way it works with the ACPI BIOS. You should check to see whether an updated device driver and a BIOS update are available. Installing one or both should resolve the conflict. 406 Part 4: Managing Windows Server 2003 Systems
We recommend high quality webhost to host and run your jsp application: christian web host services.