Microsoft Windows Server 2003 Inside (Web design programs) Out Chapter 13
Microsoft Windows Server 2003 Inside Out Chapter 13 Then a balloon message is displayed to tell you that your new hardware is installed and ready to use, as shown in the following screen: In this example, Plug and Play worked as expected. Windows Server 2003 detected the device, used the Plug and Play identification to determine which driver should be installed, and then set up the device. Because there are so many factors involved, detection and setup don t always work so smoothly, however. Sometimes the Windows operating system will warn you about something that you might need to take action to correct. One of the more common warnings you ll see is related to Hi-Speed USB devices being connected to non-Hi-Speed USB ports, as shown in the following screen. This is important because if you are connecting an external hard disk drive or other Hi-Speed USB device, the device won t operate at the rated speed. It will in fact operate at a much slower speed. Note USB 1 is the original USB specification. USB 2 is the newer USB specification, and it is referred to as Hi-Speed USB. Although you can connect USB 2 devices to USB 1 ports, the devices operate at the USB 1 speed (which is many times slower than USB 2). If you want to achieve high-speed USB transfers, you must connect to a USB 2 port, if available. You might also want to consider upgrading the USB ports on the computer so that they are USB 2 compliant. If Windows Server 2003 detects a Plug and Play device after you ve connected it but cannot locate a suitable driver, it displays a warning that a problem occurred during installation, as shown in the following screen: 382 Part 4: Managing Windows Server 2003 Systems
From our experience, we can recommend PHP Web Hosting services, if you need affordable webhost to host and run your web application.